New products
Cobwebb
Cowebb antenna Accessories
There are 13 products.
40mm Mast Center Plate Base
Robust base for and be able to hold a round tube or mast with the base of 35/40mm Aluminium base 400x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
50mm Mast Center Plate Base
Robust base for and be able to hold a round tube or mast with the base of 45/50mm Aluminium base 400x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
60mm Mast Center Plate Base
Robust base for and be able to hold a round tube or mast with the base of 55/60mm Aluminium base 400x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws. Height of the machined part where the tube enters: 150 mm.External diameter of the round piece: 80mm.Internal Diameter: 60mm.
Base Wheel Car for Mast 40mm
Robust base to step on with the car wheel and be able to hold a round tube or mast with the base of 40/35mm Aluminium base 200x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
Base Wheel Car for Mast 50mm
Robust base to step on with the car wheel and be able to hold a round tube or mast with the base of 45/50mm Aluminium base 200x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
Base Wheel Car for Mast 60mm
Robust base to step on with the car wheel and be able to hold a round tube or mast with the base of 55/60mm Aluminium base 200x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
Board holder 35-25
Aluminum holder with outer diameter 35mm and inner diameter 25mm total length 100mm. (To accommodate 25mm diameter tubes inside). 4 M4x20 Stainless steel screws included for support perpendicular to the mast. 2 M8x20 captive screws for 25mm tube clamping Used for Antennas type Hexbeam, SpiderBeam, Cobwebb and similar mounts.
Board holder 60-40
Bracket Cap plate 60mm-40mm.Aluminum holder with outer diameter 60mm and inner diameter 40mm total length 100mm 4 M6x20 Stainless steel screws included for perpendicular attachment to the mast2 M8x20 captive screws to secure the 40mm tube.Used for Antenna mounts such as Hexbeam, SpiderBeam, Cowebb and similar mounts.
