Telescopic masts
New products
Telescopic masts
Aluminium Telescopic Mast
Subcategories
There are 136 products.
40mm Mast Center Plate Base
Robust base for and be able to hold a round tube or mast with the base of 35/40mm Aluminium base 400x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
50mm Mast Center Plate Base
Robust base for and be able to hold a round tube or mast with the base of 45/50mm Aluminium base 400x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
60mm Mast Center Plate Base
Robust base for and be able to hold a round tube or mast with the base of 55/60mm Aluminium base 400x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws. Height of the machined part where the tube enters: 150 mm.External diameter of the round piece: 80mm.Internal Diameter: 60mm.
Aluminium Neck 10.4-2 [MBMT-10]
T6 quality aluminum telescopic mast for indoor or outdoor use.Measurement: 10.4 meters extended and 2 meters collected. It consists of Six sections of 50-45-40-35-30-25mm section. Tube wall: 2mm Plugs: IncludedWeight: 7 KG. (Approximate)
Aluminium Neck 13.9-2 [MBMT-13]
T6 quality aluminum telescopic mast for indoor or outdoor use. Length: 13.9 meters and 2 meters collected. Eight sections in diameter 60-55-50-45-40-35-30-25 mm Tube wall: 2mm Plugs: Included Weight: 9 KG. (Approximate)
Aluminium Neck 6.5-1.5 LIGHT [MBMT-6L]
T6 quality aluminum telescopic mast for indoor or outdoor use. Length: 6.5 meters extended and only 1.5 meters collected. Five sections of 40-35-30-25-20 mm. Tube wall: 2mm Plugs: Included Weight: 4 KG. (Approximate)
Aluminium Neck 6.5-1.5 ROBUSTO [MBMT-6R]
T6 quality aluminum telescopic mast for indoor and outdoor use.Length: 6.5 meters extended and 1.5 meters collected. These sections fall into sections of 60-55-50-45-40mm. Tube wall: 2mm Weight: 6 KG. (Approximate)
Aluminium Neck 7.4-1.5 [MBMT-7]
T6 quality aluminum telescopic mast for indoor or outdoor use. Length: 7.4 meters extended and 1.5 meters collected. Eight sections of 50-45-40-35-30-25 mm. Tube wall: 2mm Weight: 6 KG. (Approximate)
Aluminium Neck 8.9-2 LIGHT [MBMT-8L]
T6 quality aluminum telescopic mast for indoor or outdoor use.Length: 8.9 meters 2 meters collected. Five sections of 40-35-30-25-20 mm. Tube wall: 2mm Weight: 4.5 KG. (Approximate)
Aluminium Neck 8.9-2 ROBUSTO [MBMT-8R]
T6 quality aluminum telescopic mast for indoor or outdoor use. Length: 8.9 meters extended, 2 meters collected. Five sections of 60-55-50-45-40 mm. Tube wall: 2mm Weight: 8 KG. (Approximate)
Aluminium Neck 9.7-1.5 [MBMT-9]
T6 quality aluminum telescopic mast for indoor or outdoor use. Length: 9.7 meters extended, 1.5 meters collected. Eight sections of 60-55-50-45-40-35-30-25 mm. Weight: 8 KG. (Approximate)
- On sale!
Aluminum Mast 3.0-1.5 [MBMT-3LR]
T6 quality aluminum telescopic mast for indoor and outdoor use.Length: 6.5 meters extended and 1.5 meters collected. These sections fall into sections of 60-55-50-45-40mm. Tube wall: 2mm Weight: 6 KG. (Approximate)
Base Wheel Car for Mast 40mm
Robust base to step on with the car wheel and be able to hold a round tube or mast with the base of 40/35mm Aluminium base 200x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
Base Wheel Car for Mast 50mm
Robust base to step on with the car wheel and be able to hold a round tube or mast with the base of 45/50mm Aluminium base 200x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
Base Wheel Car for Mast 60mm
Robust base to step on with the car wheel and be able to hold a round tube or mast with the base of 55/60mm Aluminium base 200x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
Black 2-4mm clamp tensioner
MBCL260 Tensioner Technical detailsMetricImperialRope diameter 2 - 5mm 5/64 - 3/16 " Material Black Nylon Nylon Black Hole centers N / Amm N / A " Length 31mm 1 1/4 " Width 10mm 3/8 " Height 18mm 11/16 " Screw size N / A N / A Screw size N / A N / A Weight 22gms 0.1 oz
Black 3-6mm clamp tensioner
MBCL276 Tensioner Technical detailsMetricImperialRope diameter 3 - 6mm 5/32 - 5/16 " Material Black Nylon Nylon Black Hole centers N / Amm N / A " Length 68mm 2 5/8 " Width 23mm 7/8 " Height 48mm 1 7/8 " Screw size N / A N / A Screw size N / A N / A Weight 28gms 0.98 oz
Black 4-8mm clamp tensioner
MBCL271 Tensioner Technical detailsMetricImperialRope diameter 4 - 8mm 5/32 - 5/16 " Material Black Nylon Nylon Black Hole centers N / Amm N / A " Length 68mm 2 5/8 " Width 23mm 7/8 " Height 48mm 1 7/8 " Screw size N / A N / A Screw size N / A N / A Weight 28gms 0.98 oz
Board holder 35-25
Aluminum holder with outer diameter 35mm and inner diameter 25mm total length 100mm. (To accommodate 25mm diameter tubes inside). 4 M4x20 Stainless steel screws included for support perpendicular to the mast. 2 M8x20 captive screws for 25mm tube clamping Used for Antennas type Hexbeam, SpiderBeam, Cobwebb and similar mounts.
Board holder 60-40
Bracket Cap plate 60mm-40mm. Aluminum holder with outer diameter 60mm and inner diameter 40mm total length 100mm 4 M6x20 Stainless steel screws included for perpendicular attachment to the mast 2 M8x20 captive screws to secure the 40mm tube. Used for Antenna mounts such as Hexbeam, SpiderBeam, Cowebb and similar mounts.
Bracket Claw Wall profile "U" 200mm.
Wall/wall claw bracket for mast or tube, consisting of zinc-plated iron rod and galvanized iron sheet for masts up to 60 mm in diameter. Length: 200 mm. Profile: 40x20x3 mm. Plate: 90x120 mm. Plate Holes: 9mm (x4) For round tube from 40 to 60 mm.(60mm zinc-plated abarcon included)
Bracket Claw Wall profile "U" 600mm.
Wall/wall claw bracket for mast or tube, consisting of zinc-plated iron rod and galvanized iron sheet for masts up to 60 mm in diameter. Length: 600 mm. Profile: 40x20x3 mm. Plate: 120x200 mm. Plate Holes: 15mm (x4) For round tube from 40 to 60 mm. (60mm zinc-plated abarcon included)
Carabiner 4mm INOX.
Carabiner for different fixings. Made of Stainless Steel A4 (AISI 316). Section: 4 mm
Carabiner 5mm INOX.
Carabiner for different fixings. Made of Stainless Steel A4 (AISI 316). Section: 5 mm
![Clamp 20mm. [MB20]](https://mastil-boom.es/4354-home_default/clamp-20mm-mb20.jpg)
![Clamp 25mm. [MB24]](https://mastil-boom.es/4356-home_default/clamp-25mm-mb24.jpg)