Telescopic masts
New products
Stands
There are 48 products.
40mm Mast Center Plate Base
Robust base for and be able to hold a round tube or mast with the base of 35/40mm Aluminium base 400x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
50mm Mast Center Plate Base
Robust base for and be able to hold a round tube or mast with the base of 45/50mm Aluminium base 400x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
60mm Mast Center Plate Base
Robust base for and be able to hold a round tube or mast with the base of 55/60mm Aluminium base 400x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws. Height of the machined part where the tube enters: 150 mm.External diameter of the round piece: 80mm.Internal Diameter: 60mm.
Base Wheel Car for Mast 40mm
Robust base to step on with the car wheel and be able to hold a round tube or mast with the base of 40/35mm Aluminium base 200x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
Base Wheel Car for Mast 50mm
Robust base to step on with the car wheel and be able to hold a round tube or mast with the base of 45/50mm Aluminium base 200x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
Base Wheel Car for Mast 60mm
Robust base to step on with the car wheel and be able to hold a round tube or mast with the base of 55/60mm Aluminium base 200x400x15mm Mast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.
Board holder 35-25
Aluminum holder with outer diameter 35mm and inner diameter 25mm total length 100mm. (To accommodate 25mm diameter tubes inside). 4 M4x20 Stainless steel screws included for support perpendicular to the mast. 2 M8x20 captive screws for 25mm tube clamping Used for Antennas type Hexbeam, SpiderBeam, Cobwebb and similar mounts.
Board holder 60-40
Bracket Cap plate 60mm-40mm. Aluminum holder with outer diameter 60mm and inner diameter 40mm total length 100mm 4 M6x20 Stainless steel screws included for perpendicular attachment to the mast 2 M8x20 captive screws to secure the 40mm tube. Used for Antenna mounts such as Hexbeam, SpiderBeam, Cowebb and similar mounts.
Bracket Claw Wall profile "U" 200mm.
Wall/wall claw bracket for mast or tube, consisting of zinc-plated iron rod and galvanized iron sheet for masts up to 60 mm in diameter. Length: 200 mm. Profile: 40x20x3 mm. Plate: 90x120 mm. Plate Holes: 9mm (x4) For round tube from 40 to 60 mm.(60mm zinc-plated abarcon included)
Bracket Claw Wall profile "U" 600mm.
Wall/wall claw bracket for mast or tube, consisting of zinc-plated iron rod and galvanized iron sheet for masts up to 60 mm in diameter. Length: 600 mm. Profile: 40x20x3 mm. Plate: 120x200 mm. Plate Holes: 15mm (x4) For round tube from 40 to 60 mm. (60mm zinc-plated abarcon included)
Double Abarcon 50mm M8 (Zincado)
Mast bucket, composed of zinc-plated iron rod and galvanized iron sheet for masts up to 50 mm in diameter. Ideal for joining two masts or a tube make an extension. Metric rod 8mm Thread: 52mm Dimensions: (De fuera de la varilla a fuera) Largo 160 mm.Ancho 65 mm. Mast diameter: 25 to 50 mm.
Double mast arm
Double antenna arm with tube attachment, [for mast, turret, railing]. Made of iron and zinc-coated antioxidant protection bath. For fastening in tubes from 35 to 50 mm.(50mm zinc-plated abarcones included) Dimensions: 1120x260 mm. [Arm tube 25 mm]
Double mast arm (Sturdy)
Datos técnicos PolarizaciónVerticalAplicaciónPara mástiles hasta 40 mmDimensiones350x1.030x350 mmFijaciónCon abrazadera para mástilDimensiones del tubo35x1,5 mmBañoProtección antioxidante
Fireplace mast support
Support to put a neck/tube hugged in a chimney or column, composed of zinc-plated iron bracket and galvanized iron tube for masts up to 50 mm in diameter. Dimensions: 400x330 mm. For round tube from 35 to 50 mm. (Abarcones 50mm.)
L Wind Crossover (30-55mm)
Mast crossover 3 support points, to be able to arrive with wind wire (steel), Dyneema or rope. Diameter 30-55 mm (Galvanized). It is recommended to put cape guard.
M-8 Eye Ring (8mm)
EYE ring with Metric 8 thread, in stainless steel (AISI 304).Color: Silver
Pin Shackle (5mm.) Stainless A4
Shackle with threaded pin for joining chains or accessories. Stainless Steel. Measurement: 5mm.
Pin Shackle (6mm.) Stainless A4
Shackle with threaded pin for joining chains or accessories. Stainless Steel. Measurement: 6mm.
- On sale!
Plastic Pulley
Mini Pulley, supports up to 4mm diameter, high quality UV resistant plastic finish, suitable for wire or cable antennas, rope clamping, etc.. Weight: 5 gr. Measurements: 30mm height x 16mm width x 13mm width. Force [daN] 190 - Safe workload [daN] 47
Pluggable mast 2000x40x2 mm Zinced
Smooth, tapered mast at one end. Pluggable between those of the same diameter and tube thickness. Length: 2000 mm.External diameter: 40 mm. Wall: 2 mm.Type: ZincedWeight: 6 KG. Approx.
Pluggable neck 3000x40x2 mm Zinced
Smooth, tapered mast at one end. Pluggable between those of the same diameter and tube thickness. Length: 3000 mm.External diameter: 40 mm. Wall: 2 mm.Type: GalvanizedWeight: 8 KG. Approx.
Pluggable neck 45x3000x2 mm Zinced
Smooth, tapered mast at one end. Pluggable between those of the same diameter and tube thickness. Length: 3000 mm.External diameter: 45 mm. Wall: 2 mm.Type: ZincWeight: 9 KG. Approx.
Pulley Snout Stainless Steel
Pulley in Stainless Steel, supports rope or cable up to 10mm. Prepared for outdoors and indoors.
Rod set 290mm M6
Datos técnicos AplicaciónPara mástiles hasta 45mmLongitud290mmEstructuraVarilla métrica 6 + brida dentadaBañoProtección antioxidanteMedida interior51mmRosca55mm
Saves Capes MB-6 (6mm)
6mm rope or cable guard in stainless steel (AISI 316).Color: Silver
Saves Capes MB-8 (8mm)
8mm rope or cable guard in stainless steel (AISI 316).Color: Silver
Simple mast arm
Antenna arm with tube attachment, [for mast, turret, railing]. Made of iron and zinc-coated antioxidant protection bath. For fastening in tubes from 35 to 50 mm. (50mm zinc-plated abarcones included) Dimensions: 560x260 mm. [Arm tube 25 mm]
Single mast arm 430mm (Robust)
Datos técnicos PolarizaciónHorizontalAplicaciónPara mástiles hasta 40 mmDimensiones430x200 mmFijaciónCon abrazadera para mástilDimensiones del tubo35x1,5 mmBañoProtección antioxidante
Single mast arm 750mm (Robust)
Datos técnicos PolarizaciónHorizontalAplicaciónPara mástiles hasta 40 mmDimensiones750x200 mmFijaciónCon abrazadera para mástilDimensiones del tubo35x1,5 mmBañoProtección antioxidante
Stainless Winds Tensioner (M10)
Stainless Steel Force Tensioner.Metric measurement: 10mm.Weight: 270 gr.Force Pair: 230
Stainless Winds Tensioner (M6)
Stainless Steel Force Tensioner. Metric measurement: 6mm. Weight: 75 gr. Force Pair: 100
Stainless Winds Tensioner (M8)
Stainless Steel Force Tensioner. Metric measurement: 8mm. Weight: 143 gr. Force Pair: 160
Straight mast arm
Straight antenna arm (horizontal) with tube attachment, [for mast, turret, railing]. Made of iron and zinc-coated antioxidant protection bath. For fastening in tubes from 35 to 50 mm. (50mm zinc-plated abarcones included) Dimensions: 500 mm. [Arm tube 25 mm] Ideal for hanging Dipoles or holding long threads, etc..
Straight mast support arm (ROBUST)
Datos técnicos PolarizaciónVerticalAplicaciónPara mástiles hasta 40 mmFijaciónCon abrazadera para mástilDimensiones del tubo35x1,5 mmBañoProtección antioxidante Ideal for hanging Dipoles or holding long threads, etc..
Support for masts or 40mm tube
Wall/wall/roof bracket for mast or tube, composed of zinc-plated iron plate for masts up to 40 mm in diameter. Dimensions: 150x120 mm. For 40 mm round tube or mast.
