Inicio
New products
Stands
There are 55 products.


40mm Mast Center Plate Base
Robust base for and be able to hold a round tube or mast with the base of 35/40mmAluminium base 400x400x15mmMast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.


45mm Boom Round Neck Stand 45mm
Bracket Neck 45mm Boom Round 45mm Plate 250mmx200mmx10mm


50mm Boom Round Neck Stand 45mm
Bracket Neck 50mm Boom Round 45mm Plate 250mmx200mmx10mm


50mm Mast Center Plate Base
Robust base for and be able to hold a round tube or mast with the base of 45/50mmAluminium base 400x400x15mmMast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.


60mm Boom Square Mast Bracket 45mm
Bracket Mast 60mm Boom Square 45mm Plate 250mmx200mmx10mm


60mm Mast Center Plate Base
Robust base for and be able to hold a round tube or mast with the base of 55/60mmAluminium base 400x400x15mmMast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.Height of the machined part where the tube enters: 150 mm.External diameter of the round piece: 80mm.Internal Diameter: 60mm.


Base Wheel Car for Mast 40mm
Robust base to step on with the car wheel and be able to hold a round tube or mast with the base of 40/35mmAluminium base 200x400x15mmMast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.


Base Wheel Car for Mast 50mm
Robust base to step on with the car wheel and be able to hold a round tube or mast with the base of 45/50mmAluminium base 200x400x15mmMast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.


Base Wheel Car for Mast 60mm
Robust base to step on with the car wheel and be able to hold a round tube or mast with the base of 55/60mmAluminium base 200x400x15mmMast clamping by machined part with two Metric 8 pins attached to the base with 4 M6 stainless screws.

Board holder 35-25
Aluminum holder with outer diameter 35mm and inner diameter 25mm total length 100mm. (To accommodate 25mm diameter tubes inside). 4 M4x20 Stainless steel screws included for support perpendicular to the mast.2 M8x20 captive screws for 25mm tube clampingUsed for Antennas type Hexbeam, SpiderBeam, Cobwebb and similar mounts.


Board holder 60-40
Bracket Cap plate 60mm-40mm.Aluminum holder with outer diameter 60mm and inner diameter 40mm total length 100mm 4 M6x20 Stainless steel screws included for perpendicular attachment to the mast2 M8x20 captive screws to secure the 40mm tube.Used for Antenna mounts such as Hexbeam, SpiderBeam, Cowebb and similar mounts.

Bracket Claw Wall profile "U" 200mm.
Wall/wall claw bracket for mast or tube, consisting of zinc-plated iron rod and galvanized iron sheet for masts up to 60 mm in diameter.Length: 200 mm.Profile: 40x20x3 mm.Plate: 90x120 mm.Plate Holes: 9mm (x4)For round tube from 40 to 60 mm.(60mm zinc-plated abarcon included)

Bracket Claw Wall profile "U" 300mm.
Wall/wall claw bracket for mast or tube, composed of zinc-plated iron and galvanized iron sheet for masts up to 60 mm in diameter.Length: 300 mm.Profile: 40x20x3 mm.Plate: 120x200 mm.Plate Holes: 15mm (x4)For round tube from 40 to 60 mm.(60mm zinc-plated abarcon included)

Bracket Claw Wall profile "U" 600mm.
Wall/wall claw bracket for mast or tube, consisting of zinc-plated iron rod and galvanized iron sheet for masts up to 60 mm in diameter. Length: 600 mm. Profile: 40x20x3 mm. Plate: 120x200 mm. Plate Holes: 15mm (x4) For round tube from 40 to 60 mm. (60mm zinc-plated abarcon included)


Cobwebb Plate 250x250 ALUMINIUM 25mm Mast Tip
Fiber Tube Holder. X-mount and tube holder that supports the connection box. 250x250x6 Aluminum Plate. 10 Polypropylene flanges for 25mm tube. Stainless Steel Screws. Bracket to attach to the tip of a tube or mast diameter 40mm. [Fiber tubes not included]. Weight 2 KG Approx.

Double mast arm
Double antenna arm with tube attachment, [for mast, turret, railing]. Made of iron and zinc-coated antioxidant protection bath. For fastening in tubes from 35 to 50 mm.(50mm zinc-plated abarcones included) Dimensions: 1120x260 mm. [Arm tube 25 mm]

Fireplace mast support
Support to put a neck/tube hugged in a chimney or column, composed of zinc-plated iron bracket and galvanized iron tube for masts up to 50 mm in diameter. Dimensions: 400x330 mm. For round tube from 35 to 50 mm. (Abarcones 50mm.)